To connect your Macintosh computer to the new Multi-Function Devices (MFDs) follow the instructions below:

(Note: You must be using a Faculty or Staff computer issued by IT Services and be connected to the Albright network to connect to these printers.)

Step 1: Install the printer drivers
**If you are adding an HP Printer skip to Step 2

1. Visit: http://siica.sharpusa.com/Document-Systems/Models
2. Find your device on this site and open its page.
3. Download the appropriate Mac OS driver in the Driver category in the Downloads section of the page.
4. Unzip the downloaded file, mount the DMG file, and run the instal file by double-clicking on it and following the install wizard.

Step 2: Add the new printer/copier

1. Click System Preferences in your Menu Bar.
2. Click Printers & Scanners.
3. Click the + button to add a new printer.
4. Select your printer’s name in the list. If you aren’t sure what your printer’s name should be, check the queue name list at the bottom of the page.
5. Enter a location for the printer. (You can enter whatever helps you remember the location of the printer here. It does not need to follow a set syntax.)
6. In the “Use” field, click “Choose  Driver” and “Select Software.”
7. If you are using a Sharp printer, find the driver package for your model printer in the list, select it, and click OK. If you are using an HP printer, select Generic PostScript Printer, and click OK.
8. Click Add. Your printer should now be installed for printing.